Boiler Quality Pressure Vessel Plate

Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service to ASTM A 516/ A 516M Standard 

ASTM A 516 or ASME SA 516 grade is one of the most popular steel grades. 

It is primarily intended for use in welded pressure vessels where notch toughness is important.These grades cover a range of tensile strengths from 55 - 90 MPa and this versatility explains much of the specifications popularity. 

For plates thinner than 40mm normally supply as rolled. Plates above 40mm thick are normalised. For A 516 grade 70, which is one of most popular steels, the ASME standard composition is as follows (dependent on grade):

ASTM A516 Standard steel plates are intended for use in pressure vessels where increased strength is is important. 

ASTM A516 Chemical Properties (Cast Analysis)

Chemical & Mechanical Properties

Specification	Chemical						Mechanical Mpa, min
	C	Mn	Si	S	P	CE	Tensile	Yield	% EL	Min	Bend	Impact
	Max	Max	Max	Max	Max		Min	Min	50 GL	200 GL
ASTM-A 515
Gr - 60	0.22	0.9	0.15	0.035	0.035	---	415	220	25	21	1.5T	---
Gr - 70			0.4				550
	0.31	1.2	0.15	0.035	0.035	---	485	260	21	17	2T	---
			0.4				620
ASTM-A 516
Gr - 60	0.23	0.85	0.15	0.04	0.035	0.42	415	220	25	21	1.5T	-46°C / 18J
Gr - 70		1.2	0.4				550
	0.28	0.85	0.15	0.04	0.035	0.43	485	260	21	17	2T	-46°C / 20J
		1.2	0.4				620
IS 2002 Gr - I	0.18	0.5	0.15	0.04	0.035	0.44	360	235	24	---	2T	---
&		1.2	0.35				480
DIN 17155 Gr - H1
IS 2002 Gr - II	0.02	0.5	0.15	0.04	0.035	0.44	410	265	22	---	2T	----
&		1.2	0.35				530
DIN 17155 Gr - H2
IS 2002 Gr - III	0.22	0.5	0.15	0.04	0.035	0.44	460	290	21	---	3T	---
&		1.2	0.35				580
DIN 17155 Gr - H3
ASTM A 283 Gr C	0.28	0.9	0.17	0.04	0.035	---	380	205	25	22	2T	---
			0.35				515
ASTM A 285 Gr C	0.28	0.9	0.17	0.04	0.035	---	380	205	27	23	1.5T	---
			0.35				515
ASTM A 537 CI-I	0.24	0.7	0.15	0.035	0.035	0.45	485	345	22	18	2T	-30OC / 20J
		1.6	0.5				620
ASTM A 572 Gr-65	0.23	1.65	0.4	0.05	0.04	---	550	450	17	15	---	----
ASTM A 573 Gr-50	0.25	1.4	0.4	0.05	0.04	---	485	260	---	18	---	---
							620
EN 10028
P235 GH	0.16	0.4	0.35	0.025	0.03	---	360	235	25	---	---	Impact 0C / 27J
		1.2					480
P265 GH	0.2	0.3	0.17	0.025	0.03	---	410	265	23	---	---	0C / 27J
		1.4	0.35				530
P275 GH	0.2	0.8	0.35	0.025	0.03	---	430	275	22	---	---	0C / 27J
		1.5					550
P355 GH	0.22	1	0.6	0.025	0.03	---	510	355	21	---	---	0C / 27J
		1.7					650
API 5L
X 52	0.28	1.4	---	0.03	0.03	---	455	359	---	---	---	---
							758	531
X 56	0.26	1.4	---	0.03	0.03	---	490	386	---	---	---	---
							758	544
X 60	0.26	1.4	---	0.03	0.03	---	517	414	---	---	---	---
							758	565
X 65	0.26	1.45	---	0.03	0.03	---	531	448	---	---	---	---
							758	600
X 70	0.23	1.6	---	0.03	0.03	---	565	482	---	---	---	---

Properties

Boiler and Pressure Vessel - Comparisons and Equivalents
Equivilant Specifications & Standards				Mechanical Values		Chemical Composition Maximum (unless stated)
BS	EN	ASTM/ASME	DIN	Tensile N/mm²	Yield / min N/mm²	C	Si	Mn	P	S	Al	Cr	Cu	Ni	Mo	Nb	Ti	V
Please note the above chart is for guidance only, for exact specifications please check with our sales team.
161-360A	P235GH	A 285 GR C	H 1	360/480	235	0.16	0.35	0.40/1.20	0.03	0.025	0.02	0.3	0.3	0.3	0.08	0.01	0.03	0.02
161-430A	P265GH	A 516 - 60	H 11	410/530	265	0.2	0.4	0.50/1.40	0.03	0.025	0.02	0.3	0.3	0.3	0.08	0.01	0.03	0.02
224-400A/B	P275N/NH	-	-	390/510	275	0.18	0.4	0.50/1.40	0.03	0.025	0.02	0.3	0.3	0.5	0.08	0.05	0.03	0.05
224-460A/B	P295GH	A 516 - 65	17 MN 4	460/580	295	0.08/0.20	0.4	0.90/1.50	0.03	0.025	0.02	0.3	0.3	0.3	0.08	0.01	0.03	0.02
224-490A/B	P355GH	A 516 - 70	-	510/650	355	0.10/0.22	0.6	1.00/1.70	0.03	0.025	0.02	0.3	0.3	0.3	0.08	0.01	0.03	0.02
225-490A/B	P355N/NH	-	19 MN 6	490/630	355	0.2	0.5	0.90/1.70	0.03	0.025	0.02	0.3	0.3	0.5	0.08	0.05	0.03	0.1
243	16 M03	A 204 GR A	15 MO 3	440/590	275	0.12/0.20	0.35	0.40/0.90	0.03	0.025	-	0.3	0.3	0.3	0.25/0.35	-	-	-
620 B	13CRM045	A 387-12-2	13CRM044	450/600	300	0.08/0.18	0.35	0.40/1.00	0.03	0.025	-	0.70/1.15	0.3	-	0.40/0.60	-	-	-
621 B	-	A 387-11-2	-	515/690	340	0.09/0.17	0.50/0.80	0.40/0.65	0.025	0.015	0.02	1.00/1.50	0.3	0.3	0.45/0.60	-	-	-
622-51B	10/11CRM0910	A387-22-2	10CRM0910	520/630	310	0.08/0.14	0.5	0.40/0.80	0.03	0.025	-	2.00/2.50	0.3	-	0.90/1.10	-	-	-

 

We have materials in Stock for following Grades
---------------- Stock List ----------------- ASME SA516 Gr. 70 ASTM A516 Gr. 70 ASME SA516 Gr. 65 ASTM A516 Gr. 65 ASME SA516 Gr. 60 ASTM A516 Gr. 60 ASME SA516 Gr. 55 ASTM A516 Gr. 55 ASME SA515 Gr. 70 ASTM A515 Gr. 70 ASME SA515 Gr. 65 ASTM A515 Gr. 65 ASME SA515 Gr. 60 ASTM A515 Gr. 60 ASME SA 516 GR. 60 HIC NACE tested ASME SA 516 GR. 60/70 Dual Certified HIC Nace Tested ASME SA 516 GR. 70 HIC Nace Tested ASME SA 516 GR. 55 HIC NACE tested ASME SA 516 GR. 55/65 Dual Certified HIC Nace Tested ASME SA 516 GR. 65 HIC Nace Tested ASME SA 515 GR. 60 HIC NACE tested ASME SA 515 GR. 60/70 Dual Certified HIC Nace Tested ASME SA 515 GR. 70 HIC Nace Tested ASME SA 515 GR. 65 HIC NACE tested A516 Grade 55 A516 Grade 60 A516 Grade 65 A516 Grade 70 SA516 Grade 55 SA516 Grade 60 SA516 Grade 65 SA516 Grade 70 A515 Grade 60 A515 Grade 65 A515 Grade 70 SA515 Grade 60 SA515 Grade 65 SA515 Grade 70 ASTM A516 Grade 60 ASTM A516 Grade 65 ASME SA516 Grade 60 ASME SA516 Grade 65 BS EN 10028 P265GH BS 1501-161-430B DIN 17155 HII ASTM A285 Specification ASME SA285 Specification ASTM A516 Specification ASME SA516 Specification ASTM SA537 Specification ASME SA537 Specification EN 10028 Specification BS 1501 Specification DIN 17155 Specification Cryogenic Steel

We have our Sales Representative in following Countries.

Representative in following Countries Middle East Saudi Arabia Iran Iraq UAE Qatar Bahrain Oman Kuwait Turkey Yemen Syria Jordan Cyprus Asia Singapore Malaysia Indonesia Thailand Vietnam South Korea Japan Sri Lanka Maldives Bangladesh Mayanman Taiwan Combodia South America Argentina Bolivia Brazil Chile Venezuela Colombia Ecuador Guyana Paraguay Uruguay North America USA Canada Mexico Panama Costa Rica Puerto Rica Trinidan & Tobago Jamaica Bahamas Denmark Europe Russia Norway Germany France Italy United Kingdom Spain Ukraine Netherland Belguim Greece Czech Republic Portugal Hungary Albania Austria Swizterland Slovakia Finland Ireland Croatia Slovenia Malta Africa Nigeria Algeria Angola South Africa Libya Egypt Sudan Equatorial Guinea The Republic of Congo Gabon